Roller line as a component body by a cylinder, a connecting disk and a shaft assembly and welding together, conveying the belt tension with torsional force together with the transfer to the shaft, then turns into a very complex internal should force acting on the components of the drum, and each component of the stress in the direction and nature are not the same. The tension of the belt, the corner of the roller shaft, the rigidity of the disc and the thickness of the disc are all determined by the internal stress.. The results show that the internal stress of the cylinder is the maximum when the cylinder is about 60..

When the belt tension is applied to the roller, the displacement of each member of the roller shaft and the roller is generated. The structural analysis of the deformation displacement of the transmission roller determines the strength of the roller.. In order to further improve the overall strength of the drive roller, to seek the best combination of parameters, it is necessary to use the optimized design method to drive roller for further analysis. Specifically speaking, is in meet the driving drum strength and stiffness conditions, setting quality minimum as the objective function, docking disk pivot, shaft diameter, shell thickness, web plate thickness parameter was optimized.

Experience and drum lines optimization design result has greatly improved the stress condition of the spoke plate, in a certain extent solve the driving drum in the action of alternating stress, and the web plate of wheel and crack between the web plate and the cylinder shell, eventually leading to drum failure such a most common roller breakage problem. At the same time, the optimization design method can transplanted to stress conditions better change to the structure design of the roller and the tension roller, the optimization design of structure parameters can also be transmitted to the computer graphics and computer aided design system through special interface, to achieve the driving drum design automation, standardization and serialization of

Drum lines series production equipment in the whole structure is a very simple and beautiful and generous a series of production tools and equipment, this series of belt line series are simple in structure, convenient maintenance, beautiful appearance, reliable operation, has been widely used in electronics, home appliances, food, automobile, motorcycle, etc. industry parts and assembly of the transmission.

The main conveying form of the belt assembly line in the main course of use is strip table, independent workbench, unilateral workbench, bilateral working table and no working table transportation form.. Belt width: 20 ~ 2000mm, can also be customized according to customer requirements, conveyor belt material: in the form of a belt conveyor rubber belt, PVC belt, canvas belt, with food: with a baffle conveyor belt, with panels, flat belt and antiskid belt etc..

Worktable size according to user set, working table: fire board affixed, ordinary rubber, anti electrostatic rubber lamp, line body bracket: stainless steel, aluminum, steel spray, conveying speed is generally from 0.1 to 10M/min; also can according to user needs to use the constant speed or speed, speed, frequency control, electromagnetic speed control, electronic speed control, mechanical speed, belt rack material: carbon steel, stainless steel, aluminum.